[cisco-voip] Installing Cisco TSP Driver

[Ryan Ratliff]

Did you reboot after installing the TSP?  You need to reboot both after
installation and after configuration for it to work properly.
 

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
SullivanB at ajiusa.com
Sent: Tuesday, November 04, 2008 4:55 PM
To: Bennie.Grant at mettoni.com; cisco at cips.nl; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Installing Cisco TSP Driver



I installed TAPI application from Julmar - I can dial via my Modem, but I do
not see any Cisco devices.

 

Thank you for your help with this.

Brandon

 

 

 

From: Bennie Grant [mailto:Bennie.Grant at mettoni.com] 
Sent: Tuesday, November 04, 2008 4:44 PM
To: Sullivan, Brandon; cisco at cips.nl; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Installing Cisco TSP Driver

 

But do you even seen them listed in the applications I mentioned below? If
you do, that means the TSP is working but there is just some GUI issue. If
you cannot, then the TSP is not working at all

 

Also, have you tried reinstalling it from the CUCM? It should install over
the top and retain the previous settings

 

 

From: SullivanB at ajiusa.com [mailto:SullivanB at ajiusa.com] 
Sent: Tuesday, November 04, 2008 4:33 PM
To: Bennie Grant; cisco at cips.nl; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Installing Cisco TSP Driver

 

I can control my modem via the Outlook Call menu item.  I just can't select
the Cisco IP phone or softphone application as my outbound line.

 

Brandon

 

From: Bennie Grant [mailto:Bennie.Grant at mettoni.com] 
Sent: Tuesday, November 04, 2008 4:12 PM
To: Sullivan, Brandon; cisco at cips.nl; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Installing Cisco TSP Driver

 

Is the TSP itself actually working though - can you control devices via
Microsoft Phone Dialer or TAPI Softphone from Julmar.com?

 

From: SullivanB at ajiusa.com [mailto:SullivanB at ajiusa.com] 
Sent: Tuesday, November 04, 2008 4:10 PM
To: Bennie Grant; cisco at cips.nl; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Installing Cisco TSP Driver

 

The service is started.  I can configure other telephony services provider
there; just not the Cisco TSP item.

 

I have even tried to copy the registry settings and file folder in program
folders for this program, but I still cannot configure it nor does it work.

 

Thanks,

Brandon

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bennie Grant
Sent: Tuesday, November 04, 2008 4:04 PM
To: cips; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Installing Cisco TSP Driver

 

Also - make sure the "telephony" service in Windows is started?

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cips
Sent: Tuesday, November 04, 2008 4:01 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Installing Cisco TSP Driver

 

Maybe a windows user-rights issue?

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
SullivanB at ajiusa.com
Sent: dinsdag 4 november 2008 20:58
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Installing Cisco TSP Driver

 

Hello all - I'm new to the list and administration of a CCM.

 

I am running Windows XP SP3.  I did a fresh installation of windows and
installed:

 

Office 2007 SP1

IE7

Adobe

Other Miscellaneous Programs (should have no effect on telephony).

 

Then I installed Cisco TSP and Cisco IP Communicator.

 

At first, the Cisco TSP was working, I could dial from Outlook.  Now,
however, I cannot.

 

I can see the Cisco TSP in Phone & Modem settings, but the configure button
is grayed out.

 

I have tried uninstall and reinstall with no luck.

 

IP communicator is working fine.

 

It is not a server issue; both programs run fine from another machine.

 

Does anyone have any suggestions or even a starting point?  All
troubleshooting advice I find advises to open the program and set the Trace
level higher, but I cannot get that far.

 

Any help is appreciated!

 

Thank you,

Brandon 

 

*************************************************************************

This email and any files transmitted with it are confidential and

intended solely for the use of the individual or entity to whom they

are addressed. If you have received this email in error please notify

the system manager. http://www.mettoni.com

 

Mettoni Ltd

Registered in England and Wales: 4485956

9400 Garsington Road, Oxford Business Park, Oxford, OX4 2HN

*************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081104/1c9f4aa1/attachment.html>