[cisco-voip] Upgrading cisco ATA with CM 6.1

[Wes Sisk]

Check the compatibility matrix to see what ATA version is required for 
your new CM version.

/wes

On 11/7/2008 1:52 PM, Jason Roysdon wrote:
> I have not had any issues with ATAs needing something special.  Just as
> other SEP 79XX devices, the ATA will get new firmware automatically if
> you hadn't been updating your 4.1 CCM server with the latest firmware.
>
> Jason Roysdon
>
> James Grace wrote:
>   
>> Im upgrading my cm from 4.1 to 6.1, and want to know if i need to do
>> some with the ATA's ( firmware load, configs. etc )
>> below is the current in on the ata
>> Product ID ATA186I1-A
>> H/W Features 0x00000016
>> Firmware ATA030203SCCP051201A.zup
>> -- 
>> James Grace
>> CCVP CCNP CCNA MCSE MCDBA
>> System Engineer / Consultant
>> Email: grace.jd at gmail.com <mailto:grace.jd at gmail.com>
>>
>> MSN IM: grace.jd at gmail.com <mailto:grace.jd at gmail.com>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>     
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081107/30ba98aa/attachment.html>