[cisco-voip] CUCM - Engineering Special firmware versions

[Wes Sisk]

ES usually includes a device pack.  If a devicepack is included then 
loads will be updated.  example from the 6.1.2 train:

6.1.2 base
6.1.2.1101-2:  7941_7961-sccp.8-3-5
6.1.2.1123-1:  7941_7961-sccp.8-4-1SR1

So yes, device loads can change with ES.  As ryan stated, the ES readme 
should be included in the zip file.

Regards,
Wes

On 11/7/2008 2:34 PM, Ed Leatherman wrote:
> Thanks Jason
>
> I hadn't actually clicked on the file in the download tool when I was 
> looking for that info, didn't know there was anything else buried in 
> there past that point. Good to know.
>
> It does actually list the load info in the ES, i haven't had a chance 
> to compare it to the 6.1.2 load but I think you are right they are 
> probably the same.
>
> I'll keep your advice in mind about the ES's.. there are a couple bugs 
> I'd like to avoid but might not be worth the risk. In the past I 
> usually at least let them stew for a few weeks after they are posted, 
> so if there are major problems someone else finds them before I do.
>
> Ed
>
> On Fri, Nov 7, 2008 at 2:00 PM, Jason Roysdon 
> <cisco-voip.20081105 at jason.roysdon.net 
> <mailto:cisco-voip.20081105 at jason.roysdon.net>> wrote:
>
>     Ed,
>     I'm not speaking authoritatively, but I don't believe ES bump the
>     firmware on devices.  Those firmware updates would come in DevPacks or
>     individual phone firmware update downloads.
>
>
>
>
> -- 
> Ed Leatherman
> Assistant Director, Voice Services
> West Virginia University
> Telecommunications and Network Operations
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081107/633f044d/attachment.html>