[cisco-voip] Inter Cluster Shared Lines

[Lewis, Chris]

I would but the bandwidth requirements are too high - over the specified
40ms (one way) - hence the need for differing clusters.  The set up you
have suggested is what we have already.
 
I have also tried using Hunt groups but they do not work across clusters
either.

________________________________

From: Ed Leatherman [mailto:ealeatherman at gmail.com] 
Sent: 12 November 2008 12:49
To: Lewis, Chris
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Inter Cluster Shared Lines


Would it be feasible to register just those phones where that shared DN
needs to appear all on the same cluster?


On Wed, Nov 12, 2008 at 5:26 AM, Lewis, Chris <Chris.Lewis at magnetar.com>
wrote:


	Are you able to use shared lines across clusters on UCM 6.1.2?
	 
	IE  If  I have a Dn 5555 which rings across multile phones
simultaneously wihtin a single cluster at present (UCM4.1) , if I change
to separate clusters (due to location and bandwidth requirements) when I
migrate to UCM 6.1.2 can this still be achieveable?
	 
	If not then does anyone have any suggestions as to how I can
utilise a "hotline"number for all users across multile clusters?
	 
	Thanks
	 
	Chris


-- 
Ed Leatherman
Assistant Director, Voice Services
West Virginia University
Telecommunications and Network Operations



The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081112/4ad187ef/attachment.html>