[cisco-voip] strange behaviour after 4.1.3 to 6.1.2 upgrade !!!

[Djokic Sinisa]

hi group..

 

we've upgraded 4.1.3 cluster to 6.1.2 using DMA..

it went fine..

after that we get licenses and cluster was up&running..

after that we changed ip addresses of servers in cluster..

all according to the instructions..

 

it looks fine..

replication is fine..

all the phones registered..

 

 

BUT..

 

 

when we try to add new phone or when it autoregisters..

after we change its DN and similar settings it behaves strange..

when it's registered to PUB ( when we force it ), everythings is fine..

when it's registered to SUB, it doesn't keep it's changed info, it returns
to autoregistered config..

did anybodu face this problem..

 

looking in reports and database repliacation everythings looks fine..

all the services are up..on both servers..

 

any idea?..

 

thanx..

 

 

regards..

 

Sinisa Djokic 

System Engineer
CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified

 




  

MDS Informaticki inzenjering
Bul. Arsenija Carnojevica 170
11070 Novi Beograd, Serbia
Tel: +381 11 2015 200, 2015 273
Fax: +381 11 3194 954
www.mds.rs
sdjokic at mds.rs

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081113/e682df41/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3522 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081113/e682df41/attachment-0001.gif>