[cisco-voip] Building a Cisco Voice Lab

[Mike Louis]

I am in the process of building a lab for studying for the CCIE Voice. I am looking at the 2811 CCME Bundle and I had a couple questions.

When purchasing the 2811 bundle you get 1 PVDM16. I would like to use 1 of these for a PSTN router with 3 1Port MFT cards in it. Will the PVDM2-16 be able to be shared across all three cards as long as the voice calls are low? Should I go with multiple PVDMs for this or just go with 1 larger unit?

On the remote sites, I was planning on sticking with PVDM-16s but the HQ I was going to upgrade to a 32 for conferencing.

Any thoughts?

Mike Louis
Senior Solutions Architect
CCIE  #17082 (R&S)
NWN, Inc
mobile:336.253.5247
mlouis at nwnit.com


________________________________
Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081118/e2d61e4a/attachment.html>