[cisco-voip] ilbc codec and DevicePool for a Transcoder?

[Peter Slow]

Anthony, we need some more infromation to tell you waht's happening.

can both devices do iLBC? Trying to undesrtand what call flow is
requiing a transcoder.
Where is your transcoder physically located?

what types of devices are involved in the call?
what codecs do the devices at the central site use and what are the
model numbers of the phones in use? they don't all support iLBC.
what device pool/region is the transcoder in and what is configured
between that region and the central and remote site regions?

-Peter

On Wed, Nov 19, 2008 at 12:25 PM, Anthony Kouloglou <akoulgr at gmail.com> wrote:
> Hi,
> 1. i have configured an Enhanced IOS transcoder to be used by several remote
> devices that want to use iLBC with the central site.
> 2. The sccp transcoder is registered with the CUCM 6.1 ok. (ilbc is included
> in the sccp profile)
> 3. I have configured 2 regions one for the central site and one for the
> remote. Audio codec between them is iLBC.
> 4. I have configured a media resource group containing only the above
> transcoder.
> 5. I have also configured 2 device pools: each pool has one region of the
> above (step 3)
>
> What must the media resource list be like in order for the configuration to
> work?
> What is the meaning of assigning a device pool inside the transcoder since
> the transcoder is in a MRGL which inturn is used by a device pool?
>
> Thanks a lot
> Anthony
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>