[cisco-voip] MGCP gateway 2 dialing

[Wes Sisk]

yes.  if FXO port then make sure to not configure connection plar.  if 
digital port make sure you do provide a called party number via the 
signaling channel (inband cas or PRI) or leave off the 
direct-inward-dial command:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00801142f8.shtml

/Wes

On Wednesday, November 19, 2008 1:33:07 PM, cisco.voip 
<cisco.voip at verizon.net> wrote:
> but with h323 gw it is possbile with the dial peer?
>
> ----- Original Message ----- 
> From: "Wes Sisk" <wsisk at cisco.com>
> To: "cisco.voip" <cisco.voip at verizon.net>
> Cc: <cisco-voip at puck.nether.net>
> Sent: Wednesday, November 19, 2008 1:12 PM
> Subject: Re: [cisco-voip] MGCP gateway 2 dialing
>
>
>   
>> if the mgcp gateway uses cucm as the call agent it is not possible. /wes
>>
>> On Wednesday, November 19, 2008 1:01:15 PM, cisco.voip 
>> <cisco.voip at verizon.net> wrote:
>>     
>>> How do I implement two stage dialing on an MGCP gateway.
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>   
>>>       
>>