[cisco-voip] IPCC Record Document variable

Wed Nov 19 14:51:06 EST 2008

I am working on setting up a way in which our helpdesk can change the
welcome message to a temp emergency message.

I thought of using the record variable and then choosing the welcome menu
message to play the recording document variable created with the record
variable. This would work but my question is:
Will this variable get flushed out or purged if so at what time or event
will this variable be emptied?

Any advice or suggestions on this greatly appreciated.

Chris Hill
Information Technology Center
Southwest Research Institute
Phone: (210) 522-3405
chill at swri.org

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco-voip-request at puck.nether.net
Sent: Wednesday, November 19, 2008 12:54 PM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 61, Issue 131

Send cisco-voip mailing list submissions to
	cisco-voip at puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
	https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
	cisco-voip-request at puck.nether.net

You can reach the person managing the list at
	cisco-voip-owner at puck.nether.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."

Today's Topics:

   1. Re: Tac Guys...... CM 4.1 and headset hookswitch	control
      (CM5.1(3)) (Scott Voll)
   2. MGCP gateway 2 dialing (cisco.voip)
   3. Re: MGCP gateway 2 dialing (Wes Sisk)
   4. Re: Verifying load ... (Wes Sisk)
   5. Re: MGCP gateway 2 dialing (cisco.voip)
   6. CUCM 6.1.(2) upgrade and phone loads (Maniccia, Thomas)
   7. Re: ilbc codec and DevicePool for a Transcoder? (Peter Slow)

----------------------------------------------------------------------

Message: 1
Date: Wed, 19 Nov 2008 09:51:39 -0800
From: "Scott Voll" <svoll.voip at gmail.com>
Subject: Re: [cisco-voip] Tac Guys...... CM 4.1 and headset hookswitch
	control (CM5.1(3))
To: "Dana Tong (AU)" <Dana.Tong at didata.com.au>,
	"cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
Message-ID:
	<f84a38d30811190951i1652f859vf350fd14f981a45f at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

on cm 6.12 it's at the very bottom of the device page.

I also believe you need a newer firmware.  8.3.x or maybe better and on CM
5.1 you might need a ES / SR to get the feature.

Scott

On Tue, Nov 18, 2008 at 10:31 PM, Dana Tong (AU)
<Dana.Tong at didata.com.au>wrote:

>  I'm in Australia but the customer's system that I'm looking at doesn't
> appear to have any other locale installed bar the default American. Would
> this stop the phone having the option of the headset hookswitch? Why won't
> the EHS work in America?
>
>
>  ------------------------------
>  *From:* Scott Voll [svoll.voip at gmail.com]
> *Sent:* Wednesday, 19 November 2008 3:35 PM
> *To:* Dana Tong (AU)
> *Cc:* Jonathan Charles; cisco-voip at puck-nether.net
>
> *Subject:* Re: [cisco-voip] Tac Guys...... CM 4.1 and headset hookswitch
> control (CM5.1(3))
>
>    What model of headset?  I can't remember model numbers but we started
> w/ (i think) a 1110 and it does not work in the americas, only works in
> europe.  had to use the 9130 (again, I think it's the model number).
>
> you also have to turn on the HHC on the phone config page.  Had it working
> in 4.x and now in 6.x.
>
> Let us know.
>
> Scott
>
> On Tue, Nov 18, 2008 at 9:32 PM, Dana Tong (AU)
<Dana.Tong at didata.com.au>wrote:
>
>>  Have also tried phone firmware 8-4-1.
>>
>> Cheers
>>
>>  ------------------------------
>> *From:* cisco-voip-bounces at puck.nether.net [
>> cisco-voip-bounces at puck.nether.net] On Behalf Of Dana Tong (AU) [
>> Dana.Tong at didata.com.au]
>> *Sent:* Wednesday, 19 November 2008 3:25 PM
>> *To:* Jonathan Charles; Scott Voll
>> *Cc:* cisco-voip at puck-nether.net
>> *Subject:* Re: [cisco-voip] Tac Guys...... CM 4.1 and headset hookswitch
>> control (CM5.1(3))
>>
>>    Hey all,
>>
>> Has anyone been able to get the Jabra headsets with the HHC working on
>> CallManager 5?
>>
>> This system is:
>> CUCM version - 5.1.3.2000-3
>> IP Phone - CP-7962G
>> Phone firmware - SCCP42.8-3-3S
>>
>> URLs that have given me some information:
>>
>>
http://www.jabra.com/sites/Jabra/GNImages/Campaigns/Cisco/FAQ_Cisco_low_2901
.pdf
>>
>>
>>
http://www.jabra.com/Sites/Jabra/na-us/headsetsupport/pages/Knowledgebase.as
px?kbid=916a5151-f671-46ad-8677-8d460ac111eb
>>
>> I believe that the phone is connected ok but just don't seem to be able
to
>> get it to work.
>>
>> Thanks
>> Dana
>>
>>
>>
>>  ------------------------------
>> *From:* cisco-voip-bounces at puck.nether.net [
>> cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles [
>> jonvoip at gmail.com]
>> *Sent:* Friday, 22 February 2008 2:54 AM
>> *To:* Scott Voll
>> *Cc:* cisco-voip at puck-nether.net
>> *Subject:* Re: [cisco-voip] Tac Guys...... CM 4.1 and headset hookswitch
>> control
>>
>>  This message has been archived.
>> So, what about CCM 5.1.3 and 7961s? Jonathan On Fri, Feb 15, 2008 at 3:29
>> PM, Scott Voll <svoll.voip at gmail.com> wrote: > yes. sr6a added it... sr5b
>> did not have it. > > Thanks > > scott > > > > On Fri, Feb 15, 2008 at
1:26
>> PM, Wes Sisk <wsisk at cisco.com> wrote: > > > > > So you have the
>> checkbox/dropdown now? > > > > /Wes > > > > > > > > > > Scott Voll wrote:
>
>> > > > to come full around on this. I just got off the phone with Jabra. >
>
>> > > I had all the requiremen
>>
>>
>>
****************************************************************************
**
>>
>> - NOTICE FROM DIMENSION DATA AUSTRALIA
>>
>> This message is confidential, and may contain proprietary or legally
>> privileged information. If you have received this email in error, please
>> notify the sender and delete it immediately.
>>
>>
>>
>> Internet communications are not secure. You should scan this message and
>> any attachments for viruses. Under no circumstances do we accept
liability
>> for any loss or damage which may result from your receipt of this message
or
>> any attachments.
>>
>>
>>
****************************************************************************
**
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20081119/4f40d838/
attachment-0001.html>

------------------------------

Message: 2
Date: Wed, 19 Nov 2008 13:01:15 -0500
From: "cisco.voip" <cisco.voip at verizon.net>
Subject: [cisco-voip] MGCP gateway 2 dialing
To: <cisco-voip at puck.nether.net>
Message-ID: <000401c94a70$e74151a0$6c986bc0 at cs.myharris.net>
Content-Type: text/plain; charset=iso-8859-1

How do I implement two stage dialing on an MGCP gateway.

------------------------------

Message: 3
Date: Wed, 19 Nov 2008 13:12:50 -0500
From: Wes Sisk <wsisk at cisco.com>
Subject: Re: [cisco-voip] MGCP gateway 2 dialing
To: "cisco.voip" <cisco.voip at verizon.net>
Cc: cisco-voip at puck.nether.net
Message-ID: <49245722.7000105 at cisco.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

if the mgcp gateway uses cucm as the call agent it is not possible. /wes

On Wednesday, November 19, 2008 1:01:15 PM, cisco.voip 
<cisco.voip at verizon.net> wrote:
> How do I implement two stage dialing on an MGCP gateway.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

------------------------------

Message: 4
Date: Wed, 19 Nov 2008 13:13:15 -0500
From: Wes Sisk <wsisk at cisco.com>
Subject: Re: [cisco-voip] Verifying load ...
To: "cisco.voip" <cisco.voip at verizon.net>
Cc: cisco-voip at puck.nether.net
Message-ID: <4924573B.6040008 at cisco.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

phone is still performing TFTP download during that time.

On Wednesday, November 19, 2008 12:39:19 PM, cisco.voip 
<cisco.voip at verizon.net> wrote:
> Does anyone know why some phones are constantly 'Verifiying Load' before
> activating?
>
> Does any know exactly what the phone is doing during this time.  Is is
> downloading the files again?
>
> Tx
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

------------------------------

Message: 5
Date: Wed, 19 Nov 2008 13:33:07 -0500
From: "cisco.voip" <cisco.voip at verizon.net>
Subject: Re: [cisco-voip] MGCP gateway 2 dialing
To: "Wes Sisk" <wsisk at cisco.com>
Cc: cisco-voip at puck.nether.net
Message-ID: <000b01c94a75$4688a880$6c986bc0 at cs.myharris.net>
Content-Type: text/plain; charset=iso-8859-1

but with h323 gw it is possbile with the dial peer?

----- Original Message ----- 
From: "Wes Sisk" <wsisk at cisco.com>
To: "cisco.voip" <cisco.voip at verizon.net>
Cc: <cisco-voip at puck.nether.net>
Sent: Wednesday, November 19, 2008 1:12 PM
Subject: Re: [cisco-voip] MGCP gateway 2 dialing

> if the mgcp gateway uses cucm as the call agent it is not possible. /wes
> 
> On Wednesday, November 19, 2008 1:01:15 PM, cisco.voip 
> <cisco.voip at verizon.net> wrote:
> > How do I implement two stage dialing on an MGCP gateway.
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >   
> 
> 

------------------------------

Message: 6
Date: Wed, 19 Nov 2008 13:36:28 -0500
From: "Maniccia, Thomas" <maniccia at buffalo.edu>
Subject: [cisco-voip] CUCM 6.1.(2) upgrade and phone loads
To: "'cisco-voip at puck.nether.net'" <cisco-voip at puck.nether.net>
Message-ID:

<09665E61F9A441438477E276F2810C0EBCED7370B1 at MBCCR2.itorg.ad.buffalo.edu>

Content-Type: text/plain; charset="us-ascii"

I will be upgrading from CUCM 6.1(1a) to 6.1.(2). Should the new default
phone loads be placed on the nodes in the current 6.1(1) active partition or
uploaded after the upgrade to 6.1(2) is complete and that is the active
partition?

        TIA,
        Tom

------------------------------

Message: 7
Date: Wed, 19 Nov 2008 13:53:32 -0500
From: "Peter Slow" <peter.slow at gmail.com>
Subject: Re: [cisco-voip] ilbc codec and DevicePool for a Transcoder?
To: akoul at dataways.gr
Cc: cisco-voip at puck.nether.net
Message-ID:
	<53fc16d40811191053o1213e946i652f334466fb8397 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Anthony, we need some more infromation to tell you waht's happening.

can both devices do iLBC? Trying to undesrtand what call flow is
requiing a transcoder.
Where is your transcoder physically located?

what types of devices are involved in the call?
what codecs do the devices at the central site use and what are the
model numbers of the phones in use? they don't all support iLBC.
what device pool/region is the transcoder in and what is configured
between that region and the central and remote site regions?

-Peter

On Wed, Nov 19, 2008 at 12:25 PM, Anthony Kouloglou <akoulgr at gmail.com>
wrote:
> Hi,
> 1. i have configured an Enhanced IOS transcoder to be used by several
remote
> devices that want to use iLBC with the central site.
> 2. The sccp transcoder is registered with the CUCM 6.1 ok. (ilbc is
included
> in the sccp profile)
> 3. I have configured 2 regions one for the central site and one for the
> remote. Audio codec between them is iLBC.
> 4. I have configured a media resource group containing only the above
> transcoder.
> 5. I have also configured 2 device pools: each pool has one region of the
> above (step 3)
>
> What must the media resource list be like in order for the configuration
to
> work?
> What is the meaning of assigning a device pool inside the transcoder since
> the transcoder is in a MRGL which inturn is used by a device pool?
>
> Thanks a lot
> Anthony
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

------------------------------

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

End of cisco-voip Digest, Vol 61, Issue 131
*******************************************