[cisco-voip] Suspend phones?

[Scott Voll]

insert them with BAT with a wrong DN.  eg. *XXXX or 7XXXX and then when they
are ready to go bad update to remove the * or 7 or what ever.

Might be an option.

Scott

On Thu, Nov 20, 2008 at 12:41 PM, Lisa Notarianni <notariannil1 at scranton.edu
> wrote:

> Anyone know if there is any way to add phones and lines without actually
> making them active and leave them in a "suspended" state until we are ready
> to use them?
>
> We are converting a department to VoIP.  They are actually moving and I
> would like to add their phones but place them in a suspended state until the
> actual move date.  Users are converting from Centrex to VoIP and if I add
> their phones too early internal calls from current VoIP users have problems
> contacting them because they will reach the VoIP phone and they will not be
> moved yet.
>
> Any ideas?
>
> Thanks,
>
> Lisa
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081120/c6c323fa/attachment.html>