[cisco-voip] Installing LSC

[Wes Sisk]

make sure you restart TFTP and allow TFTP time to build all files
if doing encrypted TFTP allow longer for overhead
make sure you reset phones. reset and not restart.  rebooting CM is not 
adequate, the phones must be reset.

/wes

On Thursday, November 20, 2008 2:09:52 PM, Gokhan Arslan  (Mühendis, 
DEVOTEAM-SECURA) <garslan at secura.com.tr> wrote:
> Hi Ryan,
>  
> I already try that one, but phones did not recieve the LSC certificate 
> after they reboot?
>  
> Under BAT configuration, i made the query for phone types, after i 
> submit the query, i change the CAPF settings to, Install\upgrade, and 
> authentication mode to: By Null String . After that  i run the query, 
> all phones start to restart but did not recieve the certificate.
>  
> "  I made exactly the same settings manually for each phone and 
> everthing works fine, after i restart each phone, they recieve the LSC 
> certificate "
>  
> Is there any restriction to install LSC using BAT or did i miss something?
>  
> Thanks.
>  
> Dundar Gokhan Arslan
> ------------------------------------------------------------------------
> *From:* Ryan Ratliff [rratliff at cisco.com]
> *Sent:* Thursday, November 20, 2008 8:56 PM
> *To:* Gokhan Arslan (Mühendis, DEVOTEAM-SECURA); 
> cisco-voip at puck.nether.net
> *Subject:* RE: [cisco-voip] Installing LSC
>
> Look in BAT under Configure->Phones and you'll see CAPF at the bottom.
>  
>
> -Ryan
>
>  
>
> ------------------------------------------------------------------------
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Gokhan 
> Arslan (Mühendis, DEVOTEAM-SECURA)
> *Sent:* Thursday, November 20, 2008 12:56 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Installing LSC
>
> Hi all,
>  
> Does anyone know a way to install LSC certificates to the phones using 
> Bulk adm tool for all phones registered to CUCM 6.1.2?
>  
> I am able to install LSC manually,  I go to device setting for each 
> phone and install the certificate from CAPF information and everything 
> works fine, what i need to do is to make it automated for all phones 
> in the system.
>  
> Thanks,
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081120/aabb5e40/attachment.html>