[cisco-voip] SCCP FXS port in a line group on 6.x?

[James Buchanan]

Make sure the analog port is set for "Logged into Hunt Group". I believe
it is not by default.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Bergquist
Sent: Monday, November 24, 2008 9:35 AM
To: cisco-voip mailinglist
Subject: [cisco-voip] SCCP FXS port in a line group on 6.x?

Is there a way to get a SCCP controlled FXS port to work in a line
group in 6.x? I had tested this in 5.1 and the device off the FXS port
rang when going through a hunt/line group, but in 6.x it doesn't seem
to work.  I can call the DN on the FXS port directly fine.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip