[cisco-voip] SCCP FXS port in a line group on 6.x?

[Erick Bergquist]

Thanks, that worked.

On Mon, Nov 24, 2008 at 9:41 AM, James Buchanan <jbuchanan at ctiusa.com> wrote:
> Make sure the analog port is set for "Logged into Hunt Group". I believe
> it is not by default.
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Bergquist
> Sent: Monday, November 24, 2008 9:35 AM
> To: cisco-voip mailinglist
> Subject: [cisco-voip] SCCP FXS port in a line group on 6.x?
>
> Is there a way to get a SCCP controlled FXS port to work in a line
> group in 6.x? I had tested this in 5.1 and the device off the FXS port
> rang when going through a hunt/line group, but in 6.x it doesn't seem
> to work.  I can call the DN on the FXS port directly fine.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>