[cisco-voip] Deleting MGCP gateway

[Darren Ducote]

I need to delete an endpoint on a MGCP gateway. When I click on the gateway in call manager and click on the end-point port I assume I just click the red "x" at the top. However, it prompts me if I am sure I want to delete this gateway.

I have never deleted this before and wanted to make sure it will just delete the endpoint and not the entire gateway config. Is this correct?

________________________________
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission.


***St. Francis Medical Center and affiliates encrypt email containing Patient Health Information.  You will receive a notice with instructions on how to open any encrypted email you receive.  To learn more, go to this web site: http://userawareness.zixcorp.com/sites/index.php?b=141&type=1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081124/77af0eb8/attachment-0001.html>