[cisco-voip] Remote Control of Phones

[Michael Thompson]

Investigate CUAE, that's an application engine revolving around building
calls / writes with AXL / SOAP to the phones (The control language on the
phone).  

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ash Wright
Sent: Wednesday, November 26, 2008 4:54 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Remote Control of Phones

Hi All
I am looking for a way with out CME 3.2 system to remote control a  
phone to turn DND on remotely based on a 'event'

We are a radio station which all runs digital with IP consoles, so I  
can identify when the microphone is on and it can do stuff via IP, but  
I want to as the mic is on, to "mute" the Cisco IP phone (7942), so  
you can't hear the phone ringing in the studio when the Microphone is  
on.

Any ideas?

Ash Wright
Broadcast Technology Director
98.5 Sonshine FM
Perth, Western Australia
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip