[cisco-voip] Remote Control of Phones

[Kiran Ananthpur Bacche (kbacche)]

Cisco IP Phones recognize XML commands over HTTP. This can be used to
remotely control the Phone based on any trigger. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Michael
Thompson
Sent: Wednesday, November 26, 2008 8:23 PM
To: 'Ash Wright'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Remote Control of Phones

Investigate CUAE, that's an application engine revolving around building
calls / writes with AXL / SOAP to the phones (The control language on
the phone).  

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ash Wright
Sent: Wednesday, November 26, 2008 4:54 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Remote Control of Phones

Hi All
I am looking for a way with out CME 3.2 system to remote control a phone
to turn DND on remotely based on a 'event'

We are a radio station which all runs digital with IP consoles, so I can
identify when the microphone is on and it can do stuff via IP, but I
want to as the mic is on, to "mute" the Cisco IP phone (7942), so you
can't hear the phone ringing in the studio when the Microphone is on.

Any ideas?

Ash Wright
Broadcast Technology Director
98.5 Sonshine FM
Perth, Western Australia
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip