[cisco-voip] IPT Network with G729.

[Scott Voll]

unless something has changed you can't do G729 with IPCCx.  You will need a
transcoder for that.  G729 gives you the benefit of lower bandwidth, and
quality is only slightly affected (may not be noticable).

Scott

On Mon, Nov 24, 2008 at 6:02 AM, David Lima <David.Lima at alphasys.com.bo>wrote:

>  Hi all, I'm in a new project, it has 3 clusters with 20 locations each
> one. It will has 2 servers (PUB and SUB CUCM 7.0), 1 IPCC 7.0, Cisco Unity
> 7.0 and MeetingPlace Express 20.
>
> Is it possible to have an IPT network only with G729 to avoid mismatch
> codec problems?
>
> What could be the extra benefits of this IPT to g729?
>
> Thanks for any information.
>
> David
>
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081126/be6e9f7c/attachment.html>