[cisco-voip] Sync Partition A/B

[Jason Aarons (US)]

I have a perfectly working install of CallManager 6.1.2.  I need to make
some major changes.  Any way to have Partition A/B be synchronized prior
to the changes?  Then if I have a problem I change partitions.

 

Currently if I change partitions I will be back at 6.1.1 from several
months ago which would not be good.   I'd prefer not to restore a DRS
tar file if these changes cause problems.

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081130/fa30a822/attachment-0001.html>