[cisco-voip] Sync Partition A/B

[Jason Burns]

Upgrade to a 6.1.2 Engineering Special before making the changes.

Make the changes.

All of your changes will be on the ES version. If you want you can go back
to the base version to revert your changes.

On Sun, Nov 30, 2008 at 10:17 AM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  I have a perfectly working install of CallManager 6.1.2.  I need to make
> some major changes.  Any way to have Partition A/B be synchronized prior to
> the changes?  Then if I have a problem I change partitions.
>
>
>
> Currently if I change partitions I will be back at 6.1.1 from several
> months ago which would not be good.   I'd prefer not to restore a DRS tar
> file if these changes cause problems.
>
>
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081130/e4c86a68/attachment.html>