[cisco-voip] Slip Errors on our Routers

Jeff Ruttman ruttmanj at carewisc.org
Fri Oct 3 11:22:15 EDT 2008


Greetings, 

 

We're getting some QoS complaints and lots of trouble faxing via an ATA.

 

I'm definitely not a router guy, but I'm trying to do some research.
It's my understanding that too many slip errors cause static and
choppiness.  And maybe even echo?

 

I don't know how many slip errors are "too many," but I'm thinking we've
surpassed that threshold.

 

We have this kind of line in our config:  network-clock-participate slot
x (pointing to the vwic).

 

I'm reading that we might need this set as well:  network-clock-select x
E1 x/x/x.  I haven't been able to see a line like that in our config.

 

Any comments?

 

The PRI at one of our sites is on this router interface: 

 

T1 0/3/1 is up. 

  Applique type is Channelized T1 

  Cablelength is long gain36 0db 

  Description: PRI xxxxxxx 

  No alarms detected. 

  alarm-trigger is not set 

  Soaking time: 3, Clearance time: 10 

  AIS State:Clear  LOS State:Clear  LOF State:Clear 

  Version info Firmware: 20060707, FPGA: 13, spm_count = 0 

  Framing is ESF, Line Code is B8ZS, Clock Source is Line. 

  CRC Threshold is 320. Reported from firmware  is 320. 

  Data in current interval (554 seconds elapsed): 

     0 Line Code Violations, 0 Path Code Violations 

     53 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 

     53 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs 

  Total Data (last 24 hours) 

     0 Line Code Violations, 0 Path Code Violations, 

     8325 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins, 

     8325 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
Unavail Secs 

 

 

Thanks

jeff 

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

CONFIDENTIALITY NOTICE: The information contained in this email including attachments is intended for the specific delivery to and use by the individual(s) to whom it is addressed, and includes information which should be considered as private and confidential. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by anyone other than the intended recipient is prohibited. If you have received this message in error, please reply to the sender immediately and delete the original message and any copy of it from your computer system. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081003/703d4d91/attachment.html>


More information about the cisco-voip mailing list