[cisco-voip] VG248 no audio

c3voip c3voip at nc.rr.com
Wed Oct 8 11:22:35 EDT 2008


If the VG248 is registered to the CCM and when you call analog-to-analog on
the VG248 and the phone rings and you answer and hear nothing then I would
suspect bad DSP resources in the VG248.  Is this what you are experiencing?

 

-C

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Wednesday, October 08, 2008 10:46 AM
To: cisco-voip at puck.nether.net; CCIE Voice Online Study List
Subject: [cisco-voip] VG248 no audio

 

No audio between analog phones on the same VG248, no audio between VG248 and
PSTN, no audio between analog and IP phones...

Sw is 1.3.1

I have confirmed the routing and can ping ip phones from the vg248...

Any ideas... no bugs showed up.



Jonathan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081008/fac13309/attachment.html>


More information about the cisco-voip mailing list