[cisco-voip] VG248 no audio

[Jonathan Charles]

Figured it out, the region for the VG248 was set to 729... changed it to 711
and it works...

Does the VG248 not play nice with 729?



Jonathan

On Wed, Oct 8, 2008 at 10:22 AM, c3voip <c3voip at nc.rr.com> wrote:

>  If the VG248 is registered to the CCM and when you call analog-to-analog
> on the VG248 and the phone rings and you answer and hear nothing then I
> would suspect bad DSP resources in the VG248.  Is this what you are
> experiencing?
>
>
>
> -C
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Wednesday, October 08, 2008 10:46 AM
> *To:* cisco-voip at puck.nether.net; CCIE Voice Online Study List
> *Subject:* [cisco-voip] VG248 no audio
>
>
>
> No audio between analog phones on the same VG248, no audio between VG248
> and PSTN, no audio between analog and IP phones...
>
> Sw is 1.3.1
>
> I have confirmed the routing and can ping ip phones from the vg248...
>
> Any ideas... no bugs showed up.
>
>
>
> Jonathan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081008/e56559b6/attachment.html>