[cisco-voip] VG248 no audio

[Darren Pedley]

Not regarding the original issue but if you find when you answer a phone
connected to a VG too quickly (within the first ring) it may also experience
silence, this is a know bug, the "work around" was to put a command on the
VG to disable CLID, can't remember the exact command now though,  I had this
problem with a modem that answered too quickly and we couldn't change the
modem.  There's a Cisco bug ID out there for this so will probably be fixed
in a newer release of code (my issue was about a month ago).

D


On Wed, Oct 8, 2008 at 11:22 PM, c3voip <c3voip at nc.rr.com> wrote:

>  If the VG248 is registered to the CCM and when you call analog-to-analog
> on the VG248 and the phone rings and you answer and hear nothing then I
> would suspect bad DSP resources in the VG248.  Is this what you are
> experiencing?
>
>
>
> -C
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Wednesday, October 08, 2008 10:46 AM
> *To:* cisco-voip at puck.nether.net; CCIE Voice Online Study List
> *Subject:* [cisco-voip] VG248 no audio
>
>
>
> No audio between analog phones on the same VG248, no audio between VG248
> and PSTN, no audio between analog and IP phones...
>
> Sw is 1.3.1
>
> I have confirmed the routing and can ping ip phones from the vg248...
>
> Any ideas... no bugs showed up.
>
>
>
> Jonathan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081009/5dcdbd58/attachment.html>