[cisco-voip] VG248 no audio

[James Buchanan]

This was on the VG224, and the bug was fixed in 12.4(15)T6.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Darren Pedley
Sent: Wednesday, October 08, 2008 9:19 PM
To: c3voip
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VG248 no audio

 

Not regarding the original issue but if you find when you answer a phone
connected to a VG too quickly (within the first ring) it may also
experience silence, this is a know bug, the "work around" was to put a
command on the VG to disable CLID, can't remember the exact command now
though,  I had this problem with a modem that answered too quickly and
we couldn't change the modem.  There's a Cisco bug ID out there for this
so will probably be fixed in a newer release of code (my issue was about
a month ago).

D



On Wed, Oct 8, 2008 at 11:22 PM, c3voip <c3voip at nc.rr.com> wrote:

If the VG248 is registered to the CCM and when you call analog-to-analog
on the VG248 and the phone rings and you answer and hear nothing then I
would suspect bad DSP resources in the VG248.  Is this what you are
experiencing?

 

-C

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Wednesday, October 08, 2008 10:46 AM
To: cisco-voip at puck.nether.net; CCIE Voice Online Study List
Subject: [cisco-voip] VG248 no audio

 

No audio between analog phones on the same VG248, no audio between VG248
and PSTN, no audio between analog and IP phones...

Sw is 1.3.1

I have confirmed the routing and can ping ip phones from the vg248...

Any ideas... no bugs showed up.



Jonathan


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081008/4b444c3a/attachment.html>