[cisco-voip] SIP trunk between CCM 4.1.3 and CUCM 6.1.1

[c3voip]

Is there some kind of trick to setting up a SIP trunk between CCM 4.1.3 and
CUCM 6.1.1 servers?

 

I think I have everything setup properly, but I can't send calls from phones
on 4.1.3 to phones on 6.1.1, but calls go the other way ok.

 

This is not a partition/CSS issue, since everything is <None>.  I can setup
an ICT and it works fine, but the SIP trunk is not working in the one
direction.

 

Thanks,

-C

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081008/90cc9f44/attachment.html>