[cisco-voip] SIP trunk between CCM 4.1.3 and CUCM 6.1.1

[Voice Noob]

Why wouldn't you just use an ICT? I often wonder why people always want to
move everything to SIP when it is simply just not ready for enterprise
deployments yet.

On Wed, Oct 8, 2008 at 10:08 AM, c3voip <c3voip at nc.rr.com> wrote:

>  Is there some kind of trick to setting up a SIP trunk between CCM 4.1.3
> and CUCM 6.1.1 servers?
>
>
>
> I think I have everything setup properly, but I can't send calls from
> phones on 4.1.3 to phones on 6.1.1, but calls go the other way ok.
>
>
>
> This is not a partition/CSS issue, since everything is <None>.  I can setup
> an ICT and it works fine, but the SIP trunk is not working in the one
> direction.
>
>
>
> Thanks,
>
> -C
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081008/2443d80e/attachment.html>