[cisco-voip] Cannot get more than 4 calls to the PSTN

Louis Koekemoer (ZA) Louis.Koekemoer at za.didata.com
Wed Oct 8 15:11:16 EDT 2008


I'm using H323 with 4 x BRI's

fdsl-0133-DiamondPav#show dspfarm all
Dspfarm Profile Configuration

 Profile ID = 1, Service = TRANSCODING, Resource ID = 1
 Profile Description :
 Profile Service Mode : Non Secure
 Profile Admin State : UP
 Profile Operation State : ACTIVE
 Application : SCCP   Status : ASSOCIATED
 Resource Provider : FLEX_DSPRM   Status : UP
 Number of Resource Configured : 2
 Number of Resource Available : 2
 Codec Configuration
 Codec : g711ulaw, Maximum Packetization Period : 30
 Codec : g711alaw, Maximum Packetization Period : 30
 Codec : g729ar8, Maximum Packetization Period : 60
Dspfarm Profile Configuration

 Profile ID = 3, Service = CONFERENCING, Resource ID = 2
 Profile Description :
 Profile Service Mode : Non Secure
 Profile Admin State : UP
 Profile Operation State : ACTIVE
 Application : SCCP   Status : ASSOCIATED
 Resource Provider : FLEX_DSPRM   Status : UP
 Number of Resource Configured : 2
 Number of Resource Available : 2
 Codec Configuration
 Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
 Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Dspfarm Profile Configuration

 Profile ID = 2, Service = MTP, Resource ID = 3
 Profile Description :
 Profile Service Mode : Non Secure
 Profile Admin State : UP
 Profile Operation State : ACTIVE
 Application : SCCP   Status : ASSOCIATED
 Resource Provider : NONE   Status : NONE
 Number of Resource Configured : 250
 Number of Resource Available : 250
 Hardware Configured Resources : 0
 Hardware Available Resources : 0
 Software Resources : 250
 Codec Configuration
 Codec : g711ulaw, Maximum Packetization Period : 30


SLOT DSP VERSION  STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0    1   23.6.1   UP     N/A  FREE  xcode  1      -         -         -
0    1   23.6.1   UP     N/A  FREE  xcode  1      -         -         -
0    2   23.6.1   UP     N/A  FREE  conf   2      -         -         -
0    2   23.6.1   UP     N/A  FREE  conf   2      -         -         -

Total number of DSPFARM DSP channel(s) 4 (What does this mean)

And I have really configured this to the bare minimum. See below:
sccp local FastEthernet0/0.2
sccp ccm 10.50.245.10 identifier 1 version 5.0.1
sccp
!
sccp ccm group 1
 associate ccm 1 priority 1
 associate profile 3 register CFB0022558b6340
 associate profile 2 register MTP0022558b6340
 associate profile 1 register TRN0022558b6340
 keepalive retries 5
 switchover method immediate
 switchback method immediate
 switchback interval 15
 signaling dscp af31
!
dspfarm profile 1 transcode
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 maximum sessions 2
 associate application SCCP
!
dspfarm profile 3 conference
 codec g729r8
 codec g711alaw
 maximum sessions 2
 associate application SCCP
!
dspfarm profile 2 mtp
 codec g711ulaw
 maximum sessions software 250
 associate application SCCP




Louis Koekemoer
Cisco IPT Systems Engineer
Dimension Data
Tel.          +27 (11) 575 6560
Mob.       +27 (76) 608 7221
Fax.         +27 (11) 576 6560
Louis.Koekemoer at za.didata.com

P Before printing I think about the environment

For more information about Dimension Data, please go to www.dimensiondata.com<http://www.dimensiondata.com/>

From: smithsonianwa at gmail.com [mailto:smithsonianwa at gmail.com] On Behalf Of Tim Smith
Sent: 08 October 2008 05:07 PM
To: Louis Koekemoer (ZA)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cannot get more than 4 calls to the PSTN

Hi,

Have you also configured your DSP's for other things like transcoding / conferencing / mtp?

Are all the outbound calls definitely G711?

What gateway is it?

Cheers,

Tim




On Wed, Oct 8, 2008 at 4:04 PM, Louis Koekemoer (ZA) <Louis.Koekemoer at za.didata.com<mailto:Louis.Koekemoer at za.didata.com>> wrote:



Guys,



I need some advice. I have a customer with Multiple(about 5 and growing) SRST sites hanging of CallManager 6.x. They have WAN connectivity via ADSL, and a BRI port for redundancy. They then have 4 x 2 port BRI cards for Voice. I have a PVDM2-32 in each gateway. I cannot get more than 4 calls to the PSTN on any one site. 5th call gives me the following error: "Cause i = 0x80AF - Resource unavailable, unspecified"



Any ideas?





Louis Koekemoer

Cisco IPT Systems Engineer

Dimension Data

Tel.          +27 (11) 575 6560

Mob.       +27 (76) 608 7221

Fax.         +27 (11) 576 6560

Louis.Koekemoer at za.didata.com<http://Louis.Koekemoer@za.didata.com/>



P Before printing I think about the environment



For more information about Dimension Data, please go to www.dimensiondata.com<http://www.dimensiondata.com/>



This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081008/0537767a/attachment-0001.html>


More information about the cisco-voip mailing list