[cisco-voip] Cannot get more than 4 calls to the PSTN
Tim Smith
thsglobal at gmail.com
Wed Oct 8 16:58:04 EDT 2008
What chassis is it?
I assume the cards are installed just in VIC slots? not on an NM?
I believe with HW conference, you will chew up 1 whole DSP even if no conf
in progress.
Conf specific firmware is loaded onto the DSP, so it is not available for
voice termination.
With PVDM-32 you had 2 DSP's available. With conf configured you have 1.
Still should be enough to terminate the calls as G711 though.
Are the calls all G711?
Cheers,
Tim.
On Wed, Oct 8, 2008 at 9:11 PM, Louis Koekemoer (ZA) <
Louis.Koekemoer at za.didata.com> wrote:
> I'm using H323 with 4 x BRI's
>
>
>
> fdsl-0133-DiamondPav#show dspfarm all
>
> Dspfarm Profile Configuration
>
>
>
> Profile ID = 1, Service = TRANSCODING, Resource ID = 1
>
> Profile Description :
>
> Profile Service Mode : Non Secure
>
> Profile Admin State : UP
>
> Profile Operation State : ACTIVE
>
> Application : SCCP Status : ASSOCIATED
>
> Resource Provider : FLEX_DSPRM Status : UP
>
> Number of Resource Configured : 2
>
> Number of Resource Available : 2
>
> Codec Configuration
>
> Codec : g711ulaw, Maximum Packetization Period : 30
>
> Codec : g711alaw, Maximum Packetization Period : 30
>
> Codec : g729ar8, Maximum Packetization Period : 60
>
> Dspfarm Profile Configuration
>
>
>
> Profile ID = 3, Service = CONFERENCING, Resource ID = 2
>
> Profile Description :
>
> Profile Service Mode : Non Secure
>
> Profile Admin State : UP
>
> Profile Operation State : ACTIVE
>
> Application : SCCP Status : ASSOCIATED
>
> Resource Provider : FLEX_DSPRM Status : UP
>
> Number of Resource Configured : 2
>
> Number of Resource Available : 2
>
> Codec Configuration
>
> Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not
> Required
>
> Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not
> Required
>
> Dspfarm Profile Configuration
>
>
>
> Profile ID = 2, Service = MTP, Resource ID = 3
>
> Profile Description :
>
> Profile Service Mode : Non Secure
>
> Profile Admin State : UP
>
> Profile Operation State : ACTIVE
>
> Application : SCCP Status : ASSOCIATED
>
> Resource Provider : NONE Status : NONE
>
> Number of Resource Configured : 250
>
> Number of Resource Available : 250
>
> Hardware Configured Resources : 0
>
> Hardware Available Resources : 0
>
> Software Resources : 250
>
> Codec Configuration
>
> Codec : g711ulaw, Maximum Packetization Period : 30
>
>
>
>
>
> SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED
> PKTS_RXED
>
>
>
> 0 1 23.6.1 UP N/A FREE xcode 1 - -
> -
>
> 0 1 23.6.1 UP N/A FREE xcode 1 - -
> -
>
> 0 2 23.6.1 UP N/A FREE conf 2 - -
> -
>
> 0 2 23.6.1 UP N/A FREE conf 2 - -
> -
>
>
>
> *Total number of DSPFARM DSP channel(s) 4 **(What does this mean)*
>
>
>
> And I have really configured this to the bare minimum. See below:
>
> sccp local FastEthernet0/0.2
>
> sccp ccm 10.50.245.10 identifier 1 version 5.0.1
>
> sccp
>
> !
>
> sccp ccm group 1
>
> associate ccm 1 priority 1
>
> associate profile 3 register CFB0022558b6340
>
> associate profile 2 register MTP0022558b6340
>
> associate profile 1 register TRN0022558b6340
>
> keepalive retries 5
>
> switchover method immediate
>
> switchback method immediate
>
> switchback interval 15
>
> signaling dscp af31
>
> !
>
> dspfarm profile 1 transcode
>
> codec g711ulaw
>
> codec g711alaw
>
> codec g729ar8
>
> maximum sessions 2
>
> associate application SCCP
>
> !
>
> dspfarm profile 3 conference
>
> codec g729r8
>
> codec g711alaw
>
> maximum sessions 2
>
> associate application SCCP
>
> !
>
> dspfarm profile 2 mtp
>
> codec g711ulaw
>
> maximum sessions software 250
>
> associate application SCCP
>
>
>
>
>
>
>
>
>
> *Louis Koekemoer*
>
> Cisco IPT Systems Engineer
>
> Dimension Data
>
> Tel. +27 (11) 575 6560
>
> Mob. +27 (76) 608 7221
>
> Fax. +27 (11) 576 6560
>
> Louis.Koekemoer at za.didata.com
>
>
>
> P Before printing I think about the environment
>
>
>
> For more information about Dimension Data, please go to *
> www.dimensiondata.com*
>
>
>
> *From:* smithsonianwa at gmail.com [mailto:smithsonianwa at gmail.com] *On
> Behalf Of *Tim Smith
> *Sent:* 08 October 2008 05:07 PM
> *To:* Louis Koekemoer (ZA)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Cannot get more than 4 calls to the PSTN
>
>
>
> Hi,
>
>
>
> Have you also configured your DSP's for other things like transcoding /
> conferencing / mtp?
>
>
>
> Are all the outbound calls definitely G711?
>
>
>
> What gateway is it?
>
>
>
> Cheers,
>
>
>
> Tim
>
>
>
>
>
>
>
> On Wed, Oct 8, 2008 at 4:04 PM, Louis Koekemoer (ZA) <
> Louis.Koekemoer at za.didata.com> wrote:
>
>
>
> Guys,
>
>
>
> I need some advice. I have a customer with Multiple(about 5 and growing)
> SRST sites hanging of CallManager 6.x. They have WAN connectivity via ADSL,
> and a BRI port for redundancy. They then have 4 x 2 port BRI cards for
> Voice. I have a PVDM2-32 in each gateway. I cannot get more than 4 calls to
> the PSTN on any one site. 5th call gives me the following error: "Cause i
> = 0x80AF - Resource unavailable, unspecified"
>
>
>
> Any ideas?
>
>
>
>
>
> *Louis Koekemoer*
>
> Cisco IPT Systems Engineer
>
> Dimension Data
>
> Tel. +27 (11) 575 6560
>
> Mob. +27 (76) 608 7221
>
> Fax. +27 (11) 576 6560
>
> Louis.Koekemoer at za.didata.com
>
>
>
> P Before printing I think about the environment
>
>
>
> For more information about Dimension Data, please go to *
> www.dimensiondata.com*
>
>
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081008/ed18cb90/attachment-0001.html>
More information about the cisco-voip
mailing list