[cisco-voip] Re : problem in configuring a 2821 router to conect to a alcatel 4400 through a E1 card

[ben.evrat at 9online.fr]

 Hi,
I think you have to configure alcatel E1 port with E1 QSIG. You can configure it in MGCP as E1 standard port.
Regards,
Benoit


 


 

-----E-mail d'origine-----
De : Pedro Nogueira <pedro.nogueira at sicnet.pt>
A : cisco-voip at puck.nether.net
Envoyé le : Mercredi, 8 Octobre 2008 19:13
Sujet : [cisco-voip] problem in configuring a 2821 router to conect to a	alcatel 4400 through a E1 card






















Hello,



 



As anyone have already configured a router 2821 to work with
a Alcatel 4400 trough a E1 card ?



I need to have 64 PVDM too only to this E1 card , right? In
the end is supposed to have 30 channels on this connection .



What protocol should I use? Anyone had succefully configured
with MGCP ?



I have a Wic 2 T1/E1 card – I have to have the 2 ports
configured with the same protocol? Or can have 1 port configured with a
protocol and other with another?



If someone have already configured could please send me an
example (if it isn’t ask too much J).



What protocol sould I expect from the Alcatel 4400 E1 port? –
It is connected to a primary of the voice provider.



 



Thanks in advanced,



 



Pedro



 



 



 






 





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081009/117c87db/attachment.html>