[cisco-voip] Enable faststart for H323 gateway

[Matt Slaga (US)]

In order to enable fast start, you must have MTP resources available.
They can be software resources on a UCM server.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Lin
Sent: Thursday, October 09, 2008 2:28 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Enable faststart for H323 gateway

 

Hi guys,
I am using CUCM 6.01 and created a gateway by using H.323. I enabled the
faststart in the gateway configuration page but it doesn't take effect.
The H.323 Gateway always got Fast start Off and Tunnelling Off and the
calls all failed.
Can any body tell me how to enable Fast start and Tunnelling?
Thank you.
 
David
 
 
 
 
 

________________________________

Upgrade to Hotmail Plus and share more photos with bigger attachments.
Click here to find out how Click here to find out how
<http://get.live.com/en-ca/mailplus/features> 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081009/b91847a7/attachment-0001.html>