[cisco-voip] MGCP gateway, calls fails to International

[Johan Åhman]

You can only set the Numberplan/Type on the actual interface in CUCM. Try changing the Called Party to ISDN/Unknown.
If your provider requires you to send every call in the correct format you need to use either SIP or H323 so can configure translationrules in the GW

________________________________

Från: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] För Jason Aarons (US)
Skickat: den 13 oktober 2008 14:42
Till: cisco-voip at puck.nether.net
Ämne: [cisco-voip] MGCP gateway, calls fails to International



I'm checking with telco, but assume this is failing because of the type/plan.

 

For MGCP is the Plan/Type set in ccmadmin? Can it be set in Route Pattern 011! somewhere?

 

From: Jason Aarons (US) 
Sent: Sunday, October 12, 2008 9:29 PM
To: Jason Aarons (US)
Subject: debug intl

 

bay-2811-annex1#
002501: Oct 12 20:25:25.454 DST: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd = 8  ca
llref = 0x8034
        Cause i = 0x8281 - Unallocated/unassigned number
        Progress Ind i = 0x8288 - In-band info or appropriate now available
bay-2811-annex1#
002502: Oct 12 20:25:31.802 DST: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8
callref = 0x0034
        Cause i = 0x8290 - Normal call clearing
002503: Oct 12 20:25:31.850 DST: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8  cal
lref = 0x8034
002504: Oct 12 20:25:31.870 DST: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
  callref = 0x0034
bay-2811-annex1#
002505: Oct 12 20:27:22.467 DST: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callr
ef = 0x0035
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98397
                Exclusive, Channel 23
        Display i = 'Radiologist'
        Calling Party Number i = 0x0081, '8287632451'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x80, '011330158045858'
                Plan:Unknown, Type:Unknown
002506: Oct 12 20:27:22.603 DST: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8  c
allref = 0x8035
        Channel ID i = 0xA98397
                Exclusive, Channel 23
bay-2811-annex1#
002507: Oct 12 20:27:23.303 DST: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd = 8  ca
llref = 0x8035
        Cause i = 0x8281 - Unallocated/unassigned number
        Progress Ind i = 0x8288 - In-band info or appropriate now available
bay-2811-annex1#
002508: Oct 12 20:27:38.611 DST: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8
callref = 0x0035
        Cause i = 0x8290 - Normal call clearing
002509: Oct 12 20:27:38.651 DST: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8  cal
lref = 0x8035
002510: Oct 12 20:27:38.671 DST: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
  callref = 0x0035
bay-2811-annex1#

________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081013/2082247c/attachment.html>