[cisco-voip] MGCP gateway, calls fails to International
Jason Aarons (US)
jason.aarons at us.didata.com
Mon Oct 13 14:55:17 EDT 2008
I tried 4-5 different numbers ranging from UK to France to Australia.
All had same debug.
Customer opened a telco (AT&T) trouble ticket, translations made a
change on telco switch and everything is good to go. I left everything
MGCP and "CallManager" -jason
From: Michelet, Sebastien [mailto:Sebastien_Michelet at adp.com]
Sent: Monday, October 13, 2008 12:14 PM
To: Jason Aarons (US); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] MGCP gateway, calls fails to International
Jason,
Try this number instead: 01133158045858
The number you are calling is not a valid US to France number.
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: Monday, October 13, 2008 5:42 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MGCP gateway, calls fails to International
I'm checking with telco, but assume this is failing because of the
type/plan.
For MGCP is the Plan/Type set in ccmadmin? Can it be set in Route
Pattern 011! somewhere?
From: Jason Aarons (US)
Sent: Sunday, October 12, 2008 9:29 PM
To: Jason Aarons (US)
Subject: debug intl
bay-2811-annex1#
002501: Oct 12 20:25:25.454 DST: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd
= 8 ca
llref = 0x8034
Cause i = 0x8281 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now
available
bay-2811-annex1#
002502: Oct 12 20:25:31.802 DST: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT
pd = 8
callref = 0x0034
Cause i = 0x8290 - Normal call clearing
002503: Oct 12 20:25:31.850 DST: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd
= 8 cal
lref = 0x8034
002504: Oct 12 20:25:31.870 DST: ISDN Se0/0/0:23 Q931: TX ->
RELEASE_COMP pd = 8
callref = 0x0034
bay-2811-annex1#
002505: Oct 12 20:27:22.467 DST: ISDN Se0/0/0:23 Q931: TX -> SETUP pd =
8 callr
ef = 0x0035
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98397
Exclusive, Channel 23
Display i = 'Radiologist'
Calling Party Number i = 0x0081, '8287632451'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '011330158045858'
Plan:Unknown, Type:Unknown
002506: Oct 12 20:27:22.603 DST: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC
pd = 8 c
allref = 0x8035
Channel ID i = 0xA98397
Exclusive, Channel 23
bay-2811-annex1#
002507: Oct 12 20:27:23.303 DST: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd
= 8 ca
llref = 0x8035
Cause i = 0x8281 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now
available
bay-2811-annex1#
002508: Oct 12 20:27:38.611 DST: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT
pd = 8
callref = 0x0035
Cause i = 0x8290 - Normal call clearing
002509: Oct 12 20:27:38.651 DST: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd
= 8 cal
lref = 0x8035
002510: Oct 12 20:27:38.671 DST: ISDN Se0/0/0:23 Q931: TX ->
RELEASE_COMP pd = 8
callref = 0x0035
bay-2811-annex1#
________________________________
This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system.
________________________________
Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081013/da5dff0a/attachment-0001.html>
More information about the cisco-voip
mailing list