[cisco-voip] 4.x to 6.x upgrade

[Scott Voll]

do a DMA of 4.x install 6.x on your new server and import DMA.

Pretty over simplified but all in all it's a pretty easy upgrade on new
hardware.

Scott

On Wed, Oct 15, 2008 at 8:56 AM, Madziarczyk, Jonathan <
JMad at cityofevanston.org> wrote:

>  Hey all,
>
>
>
>   So I finally have time to work on a 4.2(3) migration to a 6.x.  I'm going
> to be doing a new server/flash-cut and I'm trying to figure out the best way
> to go about it.  Does anyone have any recommendations?  The only special
> things I'm running are:
>
> Attendant Consoles
>
> AD integrated
>
> Device mobility (phone logins using extension # and pins)
>
>
>
> I've heard I can just install fresh on a server then import the 4.2(3) data
>
> Or
>
> Make the server a subscriber first, then run the upgrade on top of the
> existing 4.2(3)
>
>
>
> Any good documentation on the process?
>
>
>
> Thanks,
> Jonathan
>
>
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *ROZA, Ariel
> *Sent:* Wednesday, October 15, 2008 8:34 AM
> *To:* Anthony Kouloglou; cisco-voip at puck-nether.net
> *Subject:* Re: [cisco-voip] CUVA fails to certain calls: video screen
> flasheson and then it turns off
>
>
>
> Anthony,
>
>
>
> Check you Region and Location settings for both phones with CUVA that fail.
> You may have not have allocated enough bandwidth for the call.
>
> (Location Bandwidth = (Audio Codec or Video Bandwidth per call) * Number of
> simultaneous calls.
>
> Regards,
>
>
>
> Ariel
>
>
>  ------------------------------
>
> *De:* cisco-voip-bounces at puck.nether.net en nombre de Anthony Kouloglou
> *Enviado el:* mié 15/10/2008 4:53
> *Para**:* cisco-voip at puck-nether.net
> *Asunto:* [cisco-voip] CUVA fails to certain calls: video screen flashes
> on and then it turns off
>
> Hi all,
> i have one cluster of 6.1(2) and two sites: one in the same LAN as the
> Cluster and another that is connected through a 6Mbps MPLS network.
> 4 weeks ago a problem started:
> 1. video calls (with CUVA) between 2 sites that are connected through the
> 4MBps LAN fail. The camera window in the PC flashes on as soon as the call
> is answered and then it turns of immediately.
> 2. video Calls between 2 parties in the same LAN succeed.
>
> Any ideas  what could be going on?
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081016/d2ce146e/attachment.html>