[cisco-voip] 4.x to 6.x upgrade

[Ed Leatherman]

Jonathan,

There is some good documentation out on cisco.com regarding upgrading from 4
to 6. Look under the support link and drill down to the installation/upgrade
docs for Unified Communications Manager. Another good resource is the SRND
for callmanager 6 (www.cisco.com/go/srnd I think)

Also might be of assistance is www.ciscoknowledgenetwork.com. there are some
great, free, presentations on various topics about CCM6

definitely want to look over the AD integration, I haven't had to mess with
it myself but from your list there I think that is the item that has changed
the most.

Hope that helps,

Ed

On Wed, Oct 15, 2008 at 11:56 AM, Madziarczyk, Jonathan <
JMad at cityofevanston.org> wrote:

>  Hey all,
>
>
>
>   So I finally have time to work on a 4.2(3) migration to a 6.x.  I'm going
> to be doing a new server/flash-cut and I'm trying to figure out the best way
> to go about it.  Does anyone have any recommendations?  The only special
> things I'm running are:
>
> Attendant Consoles
>
> AD integrated
>
> Device mobility (phone logins using extension # and pins)
>
>
>
> I've heard I can just install fresh on a server then import the 4.2(3) data
>
> Or
>
> Make the server a subscriber first, then run the upgrade on top of the
> existing 4.2(3)
>
>
>
> Any good documentation on the process?
>
-- 
Ed Leatherman
Assistant Director, Voice Services
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081015/660ea905/attachment.html>