[cisco-voip] 4.x to 6.x upgrade

[Miller, Steve]

Good questions for me as well!
 

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com 

 

________________________________

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Madziarczyk, Jonathan
Sent: Friday, October 17, 2008 1:08 PM
To: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] 4.x to 6.x upgrade



Great replies Scott and Ed, thank you.

 

So, I do have a couple of questions for anyone who's done this before. (AD integrated)

 

1)       What does the default password and pin replace?  I understand it will wipe the pins from device mobility and any other applications I have, but what about logins for the /ccmuser page?  Won't they still be using the AD username/password?

2)       Is it possible to pull a file of all the users/passwords/pins from the 4.x call manager so I can manually enter it into the 6.x?  We're installing onto a separate server so I've got the time to do all the work.

3)       Did Cisco ever implement a feature to allow admins to set the phone background?

4)       Will speed dials disappear?

 

Ya, all the changes we're going to have to ask the users to do is going to be very painful, and the more I can take off their plate, the better this rollout will be.

 

Thanks!

 

________________________________

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Thursday, October 16, 2008 3:08 PM
To: Madziarczyk, Jonathan
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] 4.x to 6.x upgrade

 

do a DMA of 4.x install 6.x on your new server and import DMA.

 

Pretty over simplified but all in all it's a pretty easy upgrade on new hardware.

 

Scott

On Wed, Oct 15, 2008 at 8:56 AM, Madziarczyk, Jonathan <JMad at cityofevanston.org> wrote:

Hey all,

 

  So I finally have time to work on a 4.2(3) migration to a 6.x.  I'm going to be doing a new server/flash-cut and I'm trying to figure out the best way to go about it.  Does anyone have any recommendations?  The only special things I'm running are:

Attendant Consoles

AD integrated

Device mobility (phone logins using extension # and pins)

 

I've heard I can just install fresh on a server then import the 4.2(3) data

Or

Make the server a subscriber first, then run the upgrade on top of the existing 4.2(3)

 

Any good documentation on the process?

 

Thanks,
Jonathan

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ROZA, Ariel
Sent: Wednesday, October 15, 2008 8:34 AM
To: Anthony Kouloglou; cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] CUVA fails to certain calls: video screen flasheson and then it turns off

 

Anthony,

 

Check you Region and Location settings for both phones with CUVA that fail. You may have not have allocated enough bandwidth for the call.

(Location Bandwidth = (Audio Codec or Video Bandwidth per call) * Number of simultaneous calls.

Regards,

 

Ariel

 

________________________________

De: cisco-voip-bounces at puck.nether.net en nombre de Anthony Kouloglou
Enviado el: mié 15/10/2008 4:53
Para: cisco-voip at puck-nether.net
Asunto: [cisco-voip] CUVA fails to certain calls: video screen flashes on and then it turns off

Hi all,
i have one cluster of 6.1(2) and two sites: one in the same LAN as the Cluster and another that is connected through a 6Mbps MPLS network.
4 weeks ago a problem started:
1. video calls (with CUVA) between 2 sites that are connected through the 4MBps LAN fail. The camera window in the PC flashes on as soon as the call is answered and then it turns of immediately.
2. video Calls between 2 parties in the same LAN succeed.

Any ideas  what could be going on?


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 


--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)
named above. This communication may contain material protected by attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible for delivering this confidential
communication to the intended recipient, you have received this communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, 
received, or sent on its network.  If you have received this confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

==============================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081017/e64d6ca0/attachment.html>