[cisco-voip] Intercluster Trunk between CCM 4 and CUCM 6

[Ratko Dodevski]

Hi
Sorry for my late response but i was pretty busy.... I'm almost sure that it
is not a CSS issue, because the same CSS works just fine for internal calls
and calls through voice gateway ... Is there some known issue for
intercluster trunk between CUCM 6.1.2.1000-13 and CCM 4.1.(3)sr3a?????? I've
tried trunking (intercluster without gatekeeper) with other CCM 4.1.(3)sr3a
and it was the same. I can make calls from phones registered in CCM
4.1.(3)sr3a to CUCM 6.1.2.1000-13 and not the other way.  I've 3 more days
to solve the problem, so please if someone have any idea.... HELP!!!!!!!!!!!

Ratko Dodevski
Skopje, Macedonia

On Sat, Oct 18, 2008 at 1:06 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> Then I would say it's a CSS issue.
>
> Scott
>
> On Fri, Oct 17, 2008 at 1:47 PM, Ratko Dodevski <rade239 at gmail.com> wrote:
>
>> Hi.... i need some help.... a configured new CUCM 6 instead of my old CCM
>> 4... everything is just fine. But there is a little problem. I have another
>> CCM 4 on a different location and it appears that the trunk between CCM 4
>> and CUCM 6 does not work. I can make calls from phones on CCM 4 to Phones
>> registerd on CUCM 6, but not the other way. All the trunk settings are same
>> as they were before. Is there something i should know about trunking CCM 4
>> and CUCM 6????? (I don't have gatekeeper)
>>
>> Thanks
>>
>> Ratko Dodevski
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081020/de997df3/attachment.html>