[cisco-voip] Outbound Sip Config for

[Craig Staffin]

Justin,
It is really vendor specific.  Your best bet is to ask the vendor for a
sample.

Some carriers require authentication and be registered as an endpoint while
others are simply a SIP dial-peer.

What vendor will you be going through,

Craig

On Tue, Oct 21, 2008 at 12:11 PM, Justin Kennedy <jkennedy at sofs.cc> wrote:

>  Anyone have a link to setup a 2800 series ISR for outbound sip trunk?
> Calls would ingress from a T1 VIC and all calls would egress to sip
> provider. Need a bare config to start testing a working solution. Any link
> pointing me in the right direction would be appreciated.
>
>
>
>
>
> Justin Kennedy
> Stallion Oilfield Services
> StaRComm VSAT Administrator
> email: jkennedy at sofs.cc
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081021/93c27669/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5384 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081021/93c27669/attachment-0001.jpe>