[cisco-voip] SIP Trunk on Call Manager 4.2

[zohaib shabir]

Thanks,

Regards,
Zohaib Shabir
DWP Group, TECH Division Karachi
Ph:+92-302-8232689

On Wed, Oct 22, 2008 at 1:02 AM, Matthew Saskin <matt at saskin.net> wrote:

> 1) The trunk should appear in the gateways/hunt lists dropdown.  It would
> be recommended to put the trunk into a hunt list/hunt group so you get a bit
> more flexibility rather than tying a route pattern directly to the trunk
>
> 2) you'll need to look at CallManager traces.  Are you actually exposing
> your callmanager to the internet to send calls to your provider??  This is
> definitely a situation where you'd want to set up a router as a session
> border controller/IPIP gateway.  Would also make troubleshooting a bit
> easier without having to dig through CCM traces :)
>
> -matt
>
> zohaib shabir wrote:
>
>> Hi,
>>
>> I have configured a sip trunk in Call Manager 4.2 which points to proxy
>> server of service provider. I have two problems.
>> 1) how to use that trunk for outbound calls since i do not find any thing
>> in route patterns page to forward calls to that trunk.
>> 2) when i call my DID number how can i check the incoming call on Call
>> Manager 4.2 for testing, i mean the way we see incoming and outgoing call on
>> Cisco router.
>>
>>
>> Regards,
>> Zohaib Shabir
>> DWP Group, TECH Division Karachi
>> Ph:+92-302-8232689
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081022/788dab21/attachment.html>