[cisco-voip] Bearer Capability not implemented
Andrius Kislas
Andrius-conf at elsis.lt
Fri Oct 24 11:12:05 EDT 2008
If you are using video endpoints, try overwriting bearer cap on
voice-port with "bearer-cap Speech".
Andrius
Mohit Saxena wrote:
> Hello Friends,
>
>
>
> I am using a Cisco 5300 gateway. ISDN Out Calls get released within a
> second. When running a q931 debug, I get cause code as Bearer capability
> not implemented. Below is the debug
>
>
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 15141234567, isdn/international to unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 2347028000709, isdn/international to
> unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 15141234567, data/national to unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 2347028000709, isdn/international to
> unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8 callref
> = 0x0005
>
> Bearer Capability i = 0x8090A3
>
> Standard = CCITT
>
> Transer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Calling Party Number i = 0x00A3, '15141234567'
>
> Plan:Unknown, Type:Unknown
>
> Called Party Number i = 0x80, '2347028000709'
>
> Plan:Unknown, Type:Unknown
>
> Oct 24 15:28:34.189 GMT: ISDN Se3/0:15 Q931: RX <- CALL_PROC pd = 8
> callref = 0x8005
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Progress Ind i = 0x8288 - In-band info or appropriate now available
>
> Oct 24 15:28:41.037 GMT: ISDN Se3/0:15 Q931: RX <- ALERTING pd = 8
> callref = 0x8005
>
> Progress Ind i = 0x8288 - In-band info or appropriate now available
>
> Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: RX <- CONNECT pd = 8
> callref = 0x8005
>
> Progress Ind i = 0x8282 - Destination address is non-ISDN
>
> Date/Time i = 0x080A180F1C2B
>
> Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: TX -> CONNECT_ACK pd = 8
> callref = 0x0005
>
> Oct 24 15:28:46.585 GMT: ISDN Se3/0:15 Q931: TX -> DISCONNECT pd = 8
> callref = 0x0005
>
> Cause i = 0x80C1 *- Bearer capability not implemented*
>
> Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: RX <- RELEASE pd = 8
> callref = 0x8005
>
> Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: TX -> RELEASE_COMP pd = 8
> callref = 0x0005
>
>
>
>
>
>
>
> Please help.
>
>
>
> br
>
> *Mohit *
>
>
>
> ------------------------------------------------------------------------
> DISCLAIMER: The information contained in this message (including any
> attachments) is confidential and may be privileged. If you have received
> it by mistake please notify the sender by return e-mail and permanently
> delete this message and any attachments from your system. Any form of
> dissemination, use, review, distribution, printing or copying of this
> message in whole or in part is strictly prohibited if you are not the
> intended recipient of this e-mail. Please note that e-mails are
> susceptible to change. STARCOMMS PLC shall not be liable for the
> improper or incomplete transmission of the information contained in this
> communication nor for any delay in its receipt or damage to your system.
> STARCOMMS PLC does not guarantee that the integrity of this
> communication has been maintained or that this communication is free of
> viruses, interceptions or interferences. STARCOMMS PLC reserves the
> right to monitor all e-mail communications, whether related to the
> business of STARCOMMS or not, through its internal or external networks.
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list