[cisco-voip] Bearer Capability not implemented

[Mohit Saxena]

Hello Friends,

 

I am using a Cisco 5300 gateway. ISDN Out Calls get released within a
second. When running a q931 debug, I get cause code as Bearer capability
not implemented. Below is the debug

 

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 15141234567, isdn/international to
unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 2347028000709, isdn/international to
unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 15141234567, data/national to unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 2347028000709, isdn/international to
unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8  callref
= 0x0005

        Bearer Capability i = 0x8090A3

                Standard = CCITT

                Transer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA98381

                Exclusive, Channel 1

        Calling Party Number i = 0x00A3, '15141234567'

                Plan:Unknown, Type:Unknown

        Called Party Number i = 0x80, '2347028000709'

                Plan:Unknown, Type:Unknown

Oct 24 15:28:34.189 GMT: ISDN Se3/0:15 Q931: RX <- CALL_PROC pd = 8
callref = 0x8005

        Channel ID i = 0xA98381

                Exclusive, Channel 1

        Progress Ind i = 0x8288 - In-band info or appropriate now
available

Oct 24 15:28:41.037 GMT: ISDN Se3/0:15 Q931: RX <- ALERTING pd = 8
callref = 0x8005

        Progress Ind i = 0x8288 - In-band info or appropriate now
available

Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: RX <- CONNECT pd = 8
callref = 0x8005

        Progress Ind i = 0x8282 - Destination address is non-ISDN

        Date/Time i = 0x080A180F1C2B

Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: TX -> CONNECT_ACK pd = 8
callref = 0x0005

Oct 24 15:28:46.585 GMT: ISDN Se3/0:15 Q931: TX -> DISCONNECT pd = 8
callref = 0x0005

        Cause i = 0x80C1 - Bearer capability not implemented

Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: RX <- RELEASE pd = 8
callref = 0x8005

Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0005

 

 

 

Please help.

 

br

Mohit 

 



DISCLAIMER: The information contained in this message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and permanently delete this message and any attachments from your system. Any form of dissemination, use, review, distribution, printing or copying of this message in whole or in part is strictly prohibited if you are not the intended recipient of this e-mail. Please note that e-mails are susceptible to change. STARCOMMS PLC shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. STARCOMMS PLC does not guarantee that the integrity of this communication has been maintained or that this communication is free of viruses, interceptions or interferences. STARCOMMS PLC reserves the right to monitor all e-mail communications, whether related to the business of STARCOMMS or not, through its internal or external networks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081024/d5e9eb92/attachment-0001.html>