[cisco-voip] QSIG over IP?

[Jason Aarons (US)]

I'm used to a router with MFT-T1 running MGCP/QSIG to Avaya, but can I
use QSIG over IP? Would that be QSIG over H323 or QSIG over SIP? Does
CallManager support either QSIG over H323/SIP?

 

Looking to connect CallManager 6.1.2 to Avaya 8700 without a T1 card,
but I don't think under Device > Trunk there are any options that
support QSIG.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmsys/a0
8trnk.html

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081030/0bb940ec/attachment.html>