[cisco-voip] QSIG over IP?

[Ryan Ratliff]

Look at the Tunneled Protocol on the H.323 gateway/trunk and you will see
Qsig.

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Thursday, October 30, 2008 3:13 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] QSIG over IP?



I'm used to a router with MFT-T1 running MGCP/QSIG to Avaya, but can I use
QSIG over IP? Would that be QSIG over H323 or QSIG over SIP? Does
CallManager support either QSIG over H323/SIP?

 

Looking to connect CallManager 6.1.2 to Avaya 8700 without a T1 card, but I
don't think under Device > Trunk there are any options that support QSIG.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmsys/a08trn
k.html

 


  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081030/86b7e390/attachment.html>