[cisco-voip] Using Correct PRI?

[Darren Ducote]

Hi,

I just installed a new gateway and PRI at offsite location. If this goes down we use the Metro-E to get to our Call manager and gateways in main facility.

Whats the best way to tell if phone at other facility are using that sub and the PRI's at that location? Phones are configured for that location.

Thanks!

________________________________
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission.


***St. Francis Medical Center and affiliates encrypt email containing Patient Health Information.  You will receive a notice with instructions on how to open any encrypted email you receive.  To learn more, go to this web site: http://userawareness.zixcorp.com/sites/index.php?b=141&type=1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081030/9f155690/attachment-0001.html>