[cisco-voip] MGCP Redundant Host Support for More Than 2 CUCM Hosts

[Jonathan Charles]

I am annoyed I am not sure of this...

BUT... if the gateway is in a device pool with a CCM Group with more than 2
servers, all of them should get pushed to the MGCP gateway... Now, you may
not see all of them (it would be worth a test to take down the first two
listed and see what the gateway does...)...

I am sure the TAC dudes can confirm (or not...)


Jonathan

On Thu, Sep 4, 2008 at 8:43 AM, Boon-Wah Tay at PS@DCSG-STC <
Boon-Wah.Tay at datacraft-asia.com> wrote:

>  Hi there
>
>
>
> We have a CUCM cluster of 5 servers, 1 Pub and 4 Subscribers.
>
> The MGCP redudant host configurations on the Cisco Voice Gateway apparently
> support 2 hosts only.
>
> We tested the mgcp redundant host using a "ip host" name with multiple IP
> addresses and the "ip domain round-robin".
>
> But the mgcp process does not try to resolve the name again.
>
> Is there any way to have the MGCP redundant host to support more than 2
> hosts, say up to 4 hosts in out 5 server cluster?
>
> Many Thanks!
>
> Boon
>
> *****************************************************************************
> This email and all contents are subject to the following disclaimer:
> http://www.datacraft-asia.com/disclaimer
> *****************************************************************************
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080904/c2989add/attachment.html>