[cisco-voip] Device loads in CM 6.1

[Ryan Ratliff]

Until you reset the phones nothing is going to happen, just as if you  
ran the exe intaller on older versions of Windows.

-Ryan

On Sep 3, 2008, at 12:53 PM, Scott Voll wrote:

I would like to change firmware on phones in my new CM 6.1.2  
enviroment.  I have downloaded the files and I'm ready to upload them  
to CM.  What kind of issues would this cause if I did it during  
operational hours?

I used to be able to slip the files in the TFTP path and restart the  
TFTP servers.  Things change with CM 6.1 so I'm just asking.

Thanks

Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080904/fd37f318/attachment.html>