[cisco-voip] CCM 6.1.2 MoH works between IP Phones but not to callers coming in from PSTN/PRI

[Jason Aarons (US)]

CallManager 6.1.2.1000.13

 

If I call phone-to-phone I hear MoH, but if I call in from PSTN I get
tone on hold.

 

All phones have a Common Device Configure with MRGL assigned.

 

The H323 Gateway has a MRGL and Location assigned, reset the H323
gateway.

 

I'm stumped.




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080905/b57834f4/attachment-0001.html>