[cisco-voip] Cisco Speech Connect help

[Gary Roberton]

I have installed a Speech Connect Server but still cannot get calls to
connect.  I have built the server and configured CUCM6 with a SIP Profile,
SIP Trunk, and associated Route Pattern.  I can call from CUCM to the server
which answers with 'who do you want to call?  I say the name and it is
recognised, Speech Connect then attempts to make the call (dialling rules
are in and the call looks like it is going to the right destination).  CUCM
sees the call coming in and there is a SIP exchange which results in a BYE
message between the two.  I cannot see why this is failing.  Has anyone else
installed one of these servers and found the same issues using the default
application?  Is there anything missing from the Cisco documentation fo rthe
basic install using the default application?

I can post up the CUCM logs but wondered if anyone had been through this
pain first.

Regards

Gary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080908/dfc37fec/attachment.html>