[cisco-voip] Cisco Speech Connect help

[Pat Hayes]

What actually happens on the call? Does it just drop?

If you could provide the sip message flow (headers should be sufficient),
it'd be easier to see what is happening on the call.

On Mon, Sep 8, 2008 at 11:55 AM, Gary Roberton <gary.ciscomail at gmail.com>wrote:

> I have installed a Speech Connect Server but still cannot get calls to
> connect.  I have built the server and configured CUCM6 with a SIP Profile,
> SIP Trunk, and associated Route Pattern.  I can call from CUCM to the server
> which answers with 'who do you want to call?  I say the name and it is
> recognised, Speech Connect then attempts to make the call (dialling rules
> are in and the call looks like it is going to the right destination).  CUCM
> sees the call coming in and there is a SIP exchange which results in a BYE
> message between the two.  I cannot see why this is failing.  Has anyone else
> installed one of these servers and found the same issues using the default
> application?  Is there anything missing from the Cisco documentation fo rthe
> basic install using the default application?
>
> I can post up the CUCM logs but wondered if anyone had been through this
> pain first.
>
> Regards
>
> Gary
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080908/f726788f/attachment-0001.html>