[cisco-voip] Power problem

Fuermann, Jason JBF005 at shsu.edu
Wed Sep 10 11:07:21 EDT 2008


Imax would leave me to believe that you have maxed out your inline power

Do a "show power inline" on your switch and look for available power

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Wednesday, September 10, 2008 8:57 AM
To: David Iverson; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Power problem

all from the switch


________________________________
From: cosmicmessenger at comcast.net
To: ahmed_elnagar at hotmail.com; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Power problem
Date: Wed, 10 Sep 2008 08:54:55 -0500
Are any of the phones using power bricks or is all power coming from the switch.
----- Original Message -----
From: Ahmed Elnagar<mailto:ahmed_elnagar at hotmail.com>
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Wednesday, September 10, 2008 8:36 AM
Subject: [cisco-voip] Power problem

Dear all

I have a 3560 switch connected to almost 14 7940 IP Phone, I have a very high call volume as it is an IPCC and a very loaded system

Sometime I have a very stange problem, all calls with outside callers do down on all IP Phones with no apperanet reason, sometime not all the phones it is a part of it only, sometime just only one phone.

I noticed this message in the logging of the switch also

2d09h: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/8:
ower Controller reports power Imax error detected
2d09h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, change
state to down
2d09h: %LINK-3-UPDOWN: Interface FastEthernet0/8, changed state to down
2d09h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, change
state to down
2d09h: %ILPOWER-7-DETECT: Interface Fa0/8: Power Device detected: Cisco PD
2d09h: %ILPOWER-5-POWER_GRANTED: I! nterface Fa0/8: Power granted
2d09h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, change
state to up



I have 12.2(25)SEE2 software version

any ideas?
________________________________
Discover the new Windows Vista Learn more!<http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE>
________________________________

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it!<http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080910/add6463d/attachment.html>


More information about the cisco-voip mailing list