[cisco-voip] Power problem

[Ahmed Elnagar]

no at all, all is connected is just 14 7940 IP Phone
plus this problem is not premenant, it happens 3 or 4 times a day and causes the phones to restart and this back to normal operation

 

From: JBF005 at shsu.eduTo: ahmed_elnagar at hotmail.comCC: cisco-voip at puck.nether.netDate: Wed, 10 Sep 2008 10:07:21 -0500Subject: RE: [cisco-voip] Power problem






Imax would leave me to believe that you have maxed out your inline power
 
Do a “show power inline” on your switch and look for available power
 


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed ElnagarSent: Wednesday, September 10, 2008 8:57 AMTo: David Iverson; cisco-voip at puck.nether.netSubject: Re: [cisco-voip] Power problem
 
all from the switch

 
 



From: cosmicmessenger at comcast.netTo: ahmed_elnagar at hotmail.com; cisco-voip at puck.nether.netSubject: Re: [cisco-voip] Power problemDate: Wed, 10 Sep 2008 08:54:55 -0500

Are any of the phones using power bricks or is all power coming from the switch.


----- Original Message ----- 

From: Ahmed Elnagar 

To: cisco-voip at puck.nether.net 

Sent: Wednesday, September 10, 2008 8:36 AM

Subject: [cisco-voip] Power problem

 
Dear all I have a 3560 switch connected to almost 14 7940 IP Phone, I have a very high call volume as it is an IPCC and a very loaded system Sometime I have a very stange problem, all calls with outside callers do down on all IP Phones with no apperanet reason, sometime not all the phones it is a part of it only, sometime just only one phone. I noticed this message in the logging of the switch also 2d09h: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/8:ower Controller reports power Imax error detected2d09h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changestate to down2d09h: %LINK-3-UPDOWN: Interface FastEthernet0/8, changed state to down2d09h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changestate to down2d09h: %ILPOWER-7-DETECT: Interface Fa0/8: Power Device detected: Cisco PD2d09h: %ILPOWER-5-POWER_GRANTED: I! nterface Fa0/8: Power granted2d09h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changestate to up   I have 12.2(25)SEE2 software version  any ideas?



Discover the new Windows Vista Learn more! 



_______________________________________________cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
 



Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it!
_________________________________________________________________
Explore the seven wonders of the world
http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080910/5c02f282/attachment-0001.html>